BJNBW - BERYLLIUM METAL AND POWDER

  • MSDS: BJNBW
  • Manufacturer: BRUSH WELLMAN INC
  • Product Name: BERYLLIUM METAL AND POWDER
  • National Stock Number: 1630-01-009-8834
Product Identification

Product ID:BERYLLIUM METAL AND POWDER
MSDS Date:10/08/1985
FSC:1630
NIIN:01-009-8834
MSDS Number: BJNBW

Responsible Party
BRUSH WELLMAN INC
SOUTH RIVER RD
ELMORE, OH 43416
US

Emergency Phone: 419-862-2745

Cage: 4B151

Contractor
BRUSH WELLMAN INC.
ELMORE, OH 43416-9502 US

Telephone: 800-862-4118; -4177 (FAX)

Cage: 4B151

Ingredients

BERYLLIUM (SARA III)

CAS: 7440-41-7

RTECS: DS1750000

OSHA PEL 2 UG/M3

ACGIH TLV: 0.002PPM; A2; 9293

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:MAY CAUSE BERYLLIOSIS, A SERIOUS
CHRONIC LUNG DISEASE, WITH COUGH, CHEST PAIN, SHORTNESS OR BREATH,
WEIGHT LOSS, WEAKNESS, AND FATIGUE. SKIN:NO ACUTE HAZ. HANDLING OF
SOLID SHAPES PRESENTS NO DE RMAT OR SKIN ABSORPTION PROBLEM.
DERMATFROMHANDLING POWDER IS LIMITED TO THE PHYSICAL NATURE OF
POWDER (SEE OVEREXPO)
Explanation of Carcinogenicity:CLASS 2A (IARC), CLASS 2, (NTP)
Effects of Overexposure:HLTH HAZ: (ABRASION), NOT THE CHEMICAL NATURE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:REMOVE FROM EXPOSURE AND CONSULT A PHYSICIAN.
INGEST:GET MD IMMEDIATELY . EYES:FLUSH FOR AT LEAST 15 MIN .

Fire Fighting

Extinguishing Media:SMOTHER POWDER FIRES WITH DRY SAND, GRAPHITE POWDER
OR SODIUM CHLORIDE. DO NOT USE WATER OR CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT TO PROTECT AGAINST AIRBORNE BERYLLIUM.
Unusual Fire/Explosion Hazard:BERYLLIUM POWDER WILL IGNITE AT
APPROXIMATELY 1200F. THE POWDER IS NOT EXPLOSIVE.

Accidental Release

Spill Release Procedures:IMMED EVACUATE & PHYSICALLY ISOLATE THE AREA.
ONLY PERSONNEL EQUIPPED W/PROPER RESPIRATORS AND PROTECTIVE
CLOTHING SHALL BE PERMITTED IN AREA. CLEAN UP POWDER SPILLS
PROMPTLY BY VACUUM AND WET CLEANIN G METHODS TO AVOID GENERATING
DUST.(SEESUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED SCBA AND HIGH EFFICIENCY
CARTRIDGE ARE REQUIRED IF BERYLLIUM IN AIR CONCENTRATIONS EXCEED
OSHA STANDARD.
Ventilation:LOCAL EXHAUST WHEN PERFORMING OPERATIONS SUCH AS MELTING,
CRUSHING, MACHINING, GRINDING, WELDING, ETC.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:FULL BODY PROT CLTHG. ALL CONTAM CLTHG
SHOULD BE PLACED IN SEALED CONTAINERS AND SENT TO SPECIAL LAUNDRY
FACILITIES.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPILL PROC:VACUUM EQUIPMENT SUPPLIED WITH HEPA FILTERS MUST BE USED.
WASTE DISP METH:PLASTIC BAGS AND PLACED WITHIN A DOT CONTAINER
APPROVED FOR POISON B COMPOUNDS. THE OUTER CONTAINER MUST BE
LABELED WITH THE APPROPRIATE EPA AND DOT HAZARD WARNING LABELS AND
SHIPPED TO AN APPROVED HAZARDOUS WASTE DISPOSAL SITE.

Chemical Properties

Boiling Pt:B.P. Text:5378F,2970C
Melt/Freeze Pt:M.P/F.P Text:2332F,1278C
Spec Gravity:1.85 @ 20C
Appearance and Odor:GRAY METALLIC SOLID OR POWDER, NO ODOR

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:BERYLLIUM METAL SCRAP, CHIPS AND POWDER ARE
NORMALLY RECYCLED. IN CASES WHERE THIS IS NOT JUSTIFIED: 1. SOLID
MATL MAY BE LANDFILLED. 2. METAL DUST OR POWDER, INCLUDING THAT
CONTAINED IN DUST COLLECTO R FILTERS, MUST BE SEALED IN TWO (SEE
SUPP DATA)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.